HFS Series
Industrial Floor Scale
Heavy-duty platform floor scale for pallet, drum, and bulk-container weighing on the warehouse or plant floor.
- Capacity range
- 0.5–5 T
- Category
- Industrial Floor Scales
- Technical details
- Available below
Manufacturing
Built, installed & supported by HMT
Compliance support
Calibration & Legal Metrology guidance
System ready
Automation, ticketing & ERP integration
01Overview
A rugged, low-to-the-ground platform scale built for forklift and pallet-jack traffic. The deck sits close to floor level with a shallow access ramp, so loading and unloading doesn't need a dedicated dock. Available in checkered or smooth steel plate depending on the traffic type.
02How it works
Compression load cells under a low deck
The platform's four corners each sit on a compression load cell — the same fundamental sensing principle used in a weighbridge, scaled down to platform size — and the indicator sums those four signals into a single weight reading. Keeping the deck low to the ground means the load cells and their mounting can be relatively compact, which is part of why this design doesn't need the deep understructure a raised platform would.
Deck material matched to traffic type
A checkered steel deck plate gives extra grip for foot traffic and pallet jacks moving across it in wet or oily conditions; a smooth deck plate is easier to clean and preferred where debris or spillage needs to be wiped or hosed off without catching in a textured surface. The choice is a genuine trade-off between traction and cleanability, made based on what's actually crossing that specific deck day to day.
Why the ramp is shallow, not absent
A low-profile deck still sits some height above the floor, however small, and a shallow access ramp lets pallet jacks and forklifts transition onto it smoothly rather than needing a dedicated loading dock — the ramp angle is kept gentle enough that a loaded pallet jack doesn't need to fight a steep grade to get onto the platform.
03Manufacturing & build quality
The deck is fabricated from steel plate — checkered or smooth per the order — welded to a structural frame sized to the platform's rated capacity, with load cell mounting pads machined flat and level so the four corners share load evenly. The frame is shot-blasted and coated for corrosion protection before compression load cells are fitted and wired through an IP65-rated junction box. The assembled platform is set up on a level surface and load-tested with certified test weights across its capacity range, and the digital indicator is matched to the platform's capacity and increment (finer increments for lighter-duty models, coarser for heavy bulk-container-rated versions) before the complete system ships as a calibrated unit.
04Problems it solves
Guesswork on pallet and drum weight
Manual estimation of pallet or drum weight — by count, by product spec sheet, or by eye — is routinely wrong; weighing directly on the warehouse floor removes that guesswork at the point where the material is actually being handled.
Dock-only weighing bottlenecks
If the only scale on site is at a loading dock, every item needing a weight check has to be routed there — a floor scale positioned where the work actually happens removes that detour and the queue it can create.
Forklift damage to fragile scale designs
A scale not built for forklift traffic gets damaged by exactly the equipment it needs to serve; a heavy-duty deck and low-profile access ramp are specifically designed to take that traffic without structural damage.
Dust and debris fouling the junction box
A warehouse floor sees dust, dropped product, and general debris — an IP65-rated junction box keeps that environment from reaching and corroding the wiring that sums the load cell signals.
05Why it matters
Inventory accuracy and billing accuracy both start at the point where material is actually weighed, and if that point is inconvenient — off in a corner, or only accessible via a dock — operators route around it or estimate instead, and the accuracy the plant is paying for never actually gets used. A floor scale that sits where forklift and pallet traffic already moves removes the friction that causes people to skip weighing, which is often the real difference between a scale that's actually used every day and one that technically exists but doesn't get walked to.
06Salient features
- Low-profile deck for easy pallet jack and forklift access
- Checkered or smooth steel deck options
- Compression load cells, IP65-rated junction box
- Digital indicator with capacity/increment matched to duty
07Specifications
| Model | Capacity (T) | Least Count | Platform Size (m) | Notes |
|---|---|---|---|---|
| HFS-500 | 0.5 | 0.1 kg | 1 x 1 | Light-duty pallet weighing |
| HFS-1000 | 1 | 0.2 kg | 1.2 x 1.2 | — |
| HFS-2000 | 2 | 0.5 kg | 1.5 x 1.5 | — |
| HFS-3000 | 3 | 1 kg | 1.5 x 1.5 | Heavy-duty warehouse floor scale |
| HFS-5000 | 5 | 2 kg | 2 x 2 | Bulk container / drum weighing |
08Technical file
Need the full technical sheet?
Request drawings, model-specific details and project documentation from the HMT team. A downloadable product file will appear here once approved.
09Complete system
Plan beyond the deck.
A vehicle weighing point can combine the weighbridge with indicator, load cells, traffic management and H-Weigh software for an accountable end-to-end workflow.
08In the field
09Frequently asked
What capacity should we choose?
Size to your heaviest expected pallet or drum load with reasonable headroom — as a rule of thumb, avoid specifying a platform that will routinely operate near its rated maximum, since accuracy and longevity both benefit from some margin.
Do we need a ramp, and how long should it be?
A shallow access ramp is standard for this design, sized to the deck height and matched to a gentle enough gradient for laden pallet jacks — your supplier will size it to your specific platform height.
Checkered or smooth deck — which is right for us?
Checkered for grip where traffic includes foot traffic or the floor sees moisture/oil; smooth where easy cleaning and debris removal matters more than added traction — many food, pharma, and clean-handling environments prefer smooth for that reason.
Can it be used outdoors?
The standard build is suited to indoor warehouse/plant floor use; for outdoor exposure, confirm the junction box and load cell sealing rating are adequate for your weather conditions, or consider a design specified for outdoor duty.
How often should it be recalibrated?
Periodically, on a schedule matched to usage intensity and any regulatory requirement that applies to your industry — heavily used platform scales generally warrant more frequent checks than lightly used ones.
10Industries this serves
Ready to spec a industrial floor scale?
Tell us the application — our team responds with model recommendations, not a generic brochure.